- Rockchip Upgrade_tool Tablet
- Rockchip Create Upgrade Disk Tool V1.4
- Rockchip Upgrade Disk Tool
- Rockchip Upgrade Dll Tool V1.26
Rockchip Batch Tool v1.7 is a small application for windows computer created by KS Rockchip Mobile Inc, which allows you to flash the stock fimwware on rockchip based device. Rockchip Batch Tool v1.7 is a very useful tool if you want to upgrade the software or completely replace it with a newer version.
If you own a device that uses Rockchip chipset and you want to update or replace its firmware, Rockchip Batch Tool v1.7 allows you to do it quickly and efficiently. The interface of Rockchip Batch Tool v1.7 is very simple and easy to use. During the upgrade process you can view the progress in the main window.
In order to use the Rockchip Batch Tool, you need to install the Universal ADB Driver on your computer.
After installing the Android Universal Driver on your computer you need to connect your Android device to the computer using the USB data cable. And once your Android device is detected by the computer, you need to launch the Tool.
- Jun 27, 2018 Inside the zip file, you will find the SDFirmwareTool.exe and a Word Document with detailed instructions on how to use the Rockchip SD Firmware Tool correctly. Attention: Using the Rockchip SD Firmware Tool can also damage your device if not used correctly.
- Rockchip Create Upgrade Disk Tool v1.46 helps you to install firmware on Rockchip device from Micro SD card. May 15, 2020 RockChip Batch Tool is a software application that helps you flash firmware on the RockChip chipset powered devices (RK2918, RK3066, RK3188).On this page, we are bringing you the latest version of the RockChip Batch Tool.
Rockchip Upgrade_tool Tablet
Rockchip Batch Tool v1.7
Package Name: Rockchip_Batch_Tool_v1.7.zip
Alternative Name: Rockchip Batch Tool v1.7
Package Version: v1.7
Previous Version: Rockchip Batch Tool v1.5
Package Size: 31 MB
Readme Once:
[*] Compatibility: The Rockchip Batch Application runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 (32 bit and 64 bit).
[*] Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.
In this tutorial we show you how to upgrade the Xmedex XTREME devices firmware using the supplied cables, as well as RockChips flash tool (Android Tool Relea.
[*] Other Tools: If you are searching for other useful tools then follow our Tools Section to download free GSM Tools.
[*] Credits: Rockchip Batch Tool is created and distributed by Rockchip Mobile Inc (developer). So, full credits goes to Rockchip Mobile Inc (developer) for sharing the tool for free.
This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.
BEFORE START
What do you need:
- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)
The first thing you need is to download the archive with firmware. Inside archive, you find:
- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image
Rockchip Create Upgrade Disk Tool V1.4
INSTALLING DRIVERS
Launch RK DriverAssitant and press “Install Driver”
Apply all changes and warnings during installation until finishing message
CONNECTING TO PC Microsoft baseline security analyzer replacement for mac.
Run Batch tool or Android tool on your host PC.
In order to connect device with Host PC and run bootloader mode you should perform following steps:
1. Plug off device power adaptor.
2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.
3. Run Batch tool or RK Android tool
4. Hold the hardware recovery button.
5. Plug in power adaptor and Turn on device if not turning on automatically.
Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.
RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.
IF YOU USE ANDROID TOOL:
In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “
Rockchip Upgrade Disk Tool
Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.
For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)
Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.
3. Then choose one of configurations files:
config.cfg - if want flash only Android
config_dualboot.cfg - if want flash dualboot
config_linux.cfg - if want flash only linux
3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.
IF YOU USE BATCH TOOL:
Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.
Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.
OTG usb ports and recovery buttons on Ugoos devices:
Ugoos UT4/UT3+/UT6
Recovery button and USB OTG port is on the right side
Ugoos UT3/UT3s (old version)
Recovery button and USB OTG port is on the right side
Ugoos UM3/UM4 Anne of green gables 1987 download.
Recovery button is from the left to antenna connector
OTG USB port is left one.
Ugoos UT5 Pro
Ugoos UM2
Ugoos UT2
Rockchip Upgrade Dll Tool V1.26
Ugoos UT1
Find us: